Prices:
excl. VAT
incl. VAT
  • Unique assortment for every truck
  • Your style inside and outside
  • Quick and easy at home
  • One passion one family
Do you have a question about this product?

Ask us your question

AMERICANA!! CONVERSION KIT DLR - SUITABLE FOR VOLVO FH4 FROM 2015 volvo fh4  Gelbe LED tagfahrleuchtem passend für VOLVO FH tag new version positionlight amber volvo fh4
AMERICANA!! CONVERSION KIT DLR - SUITABLE FOR VOLVO FH4 FROM 2015
volvo fh4  Gelbe LED tagfahrleuchtem passend für VOLVO FH tag
new version positionlight amber volvo fh4
85,00
per set excl. VAT
102,85
per set incl. VAT
In stock
Add to your wishlist
  • Unique assortment
  • High quality products
  • Fast delivery
  • Easy returns
  • Friendly customer service for all your questions
AMERICANA!! CONVERSION KIT DLR - SUITABLE FOR VOLVO FH4 FROM 2015 volvo fh4  Gelbe LED tagfahrleuchtem passend für VOLVO FH tag new version positionlight amber volvo fh4
AMERICANA!! CONVERSION KIT DLR - SUITABLE FOR VOLVO FH4 FROM 2015
85,00
per set excl. VAT
102,85
per set incl. VAT

Product description

Complete set with ORANGE LED light sources standard white daytime running light can be converted to AMERICANA (WHITE/ORANGE) light. Suitable for Volvo FH's from 2012
WITH THIS SET ONLY THE LOWER ORIGIN PLATE IS REPLACED !!

Each set consists of a total of 4 Luxeon Rebel LEDs, which together provide up to 2000 lumens! This corresponds approximately to the original brightness.
 
The lamps are the same as the actual original run lights, placed with the powerful High Power LEDs on aluminum plates.
These plates provide eem better cooling by heat transfer to the original cooling and extends the life of the LEDs.
The original terminals are used again, so installation is easy.
 
Each set contains four lights and thermal paste for assembly. There are two LEDs on each side. The light source with six LEDs mounted to the crooks side, and the four light sources at the bottom.
 
Installation is as follows:
- Remove the connectors from the existing lighting.
- Remove the screws that secure the original lamps are put.
- Remove the lights of the cooling plates.
- Remove the thermal paste and clean the surface well.
- Insert the supplied thermal paste in a thin even layer on the koelpaaten where the lamp will be placed.
- Push the new bulb in the thermal paste and place it securely with the original screw.
- Plug in the new bulb
s.

THIS SET HAS NO E-MARK !!