DIMMER 12V / 24V - 5V CONTROL SIGNAL - SUITABLE FOR SCANIA NEXT GEN

Dimmer control that makes the 5V signal from Scania's built-in dimmer to 12V or 24V, depending on the power supply. This means that you can connect regular LED bulbs and led strips, and still dimmer them with the built-in 5V dimmer.

The control is easy to connect with the screw terminals.

     INPUT (input)
         5V - Plus from the Scania damper is connected here (5V)
         GND - Connect minus the truck (24V)
         24V - Connect plus from the truck
     OUTPUT (output)
         24V - Output with plus to light sources (24V)
         GND - The output minus the light sources

It is important to use both GND and 24V on the controller when connecting the light sources. The control should be connected as close to the damper as possible.

Compatible with normal 3mm and 5mm LEDs and LED strips with a working voltage of 12 or 24V, not suitable for LEDs with built-in voltage regulator for 10-30V. The maximum allowable current is 8A.
*Model Update December 2021*