Auxiliary light and warning light in one unit with this multifunctional Ledson bar! Now you no longer have to think about mounting several extra lights and a strobe / warning light, you save space and get a simplified installation.
The bar is available in three different sizes (20", 32" and 40") and therefore fits every need. All lengths are E-approved as auxiliary lights according to ECE R112 and have approved strobelight (ECE R65). They are also equipped with xenon white or yellow / orange position lights, which is optional to connect.
Lot's of light and even more safety on the road!
Characteristics:
Combo Beam light image (wide and oblong)
E-marked ECE R112 (ref. 50)
ECE R65 / R7 / R10 (EMC-rated)
Range: 449 m (1 lux)
Lumen: 13860 lm (theoretical), 5583 lm (actual)
Color temperature 5700K (cold white)
Strobelight: Orange (ECE R65)
Position light: Xenon white alt. yellow/orange
Technical data:
165 W (33 x OSRAM CSHP LED)
IP68/69K: withstands hot water under pressure - Read more about IP rating here
Aluminum housing and polycarbonate lens
4-pin DT connector (included)
Voltage: 10-30V
Dimensions & weight (excl. Brackets):
Width: 798 mm
Height: 40 mm
Depth: 54 mm (excl. Bracket)
Weight: 2100 grams
Cable colors:
Green: Flash function
Gray: White position light
Yellow: Orange position light
NOTE: The DT connector must not be cut as it entails an increased risk of moisture damage and the warranty then ceases to apply. DT connector (male) with joint included with the product.