The included Ledson Flexistrips for this stroller lighting kit illuminate the stroller so that you are visible but also so that you can see around you! The LED strips are IP68-rated and thus fully waterproof.
Complete with a Powerbank ** (or other USB power source) and you have your nicely lit and dark-proof stroller ready for safe morning and evening rounds.

Included in this kit for pram lighting:
- 30 cm white Flexistrip front
- 2 x 11.5 cm orange Flexistrip on the sides
- 30 cm red Flexistrip at the back
- USB adapter cable
- DC connector round female
- 2 x Cable branch to 5 cables
- 10 x Color tape

About the USB adapter cable
The USB adapter cable can be connected to your, for example, Powerbank (or something else that provides power via a USB port) and then on to e.g. Flexistrips to power these! The adapter cable converts the USB / Powerbank's 5V to 12V (a so-called step-up cable). Cable length 90 cm, maximum load 0.4A.

Connection:
- From your Powerbank (USB power source), connect the USB adapter cable
- Then connect the DC connector female (30662) to the USB adapter cable
- To be able to operate more than one Flexistrip, use 2 x cable branch to 5 cables *
- Connect DC connector male to one side of the branch and your Flexistrips to the other side of the branch

* A cable branch is intended for plus or minus cables, so you get two (one for the minus cables and one for the plus cables). These two branches are then sufficient for up to five Flexistrips.

** The package draws about 1500 mAh per hour, keep this in mind when purchasing your power bank (if you do not already have one)