Prices:
excl. VAT
incl. VAT
  • Unique assortment for every truck
  • Your style inside and outside
  • Quick and easy at home
  • One passion one family
Do you have a question about this product?

Ask us your question

UNTILL 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4

Product number: 240785

VOLVO F4 AMBER DAGRIJLVERLICHT VOLVO F4 AMBER DAGRIJLVERLICHT GELE STADLICHT VOLVO fh4 NIEUWE VERSIE VOLVO fh4 tagfahrleuchten gelb
VOLVO F4 AMBER DAGRIJLVERLICHT
VOLVO F4 AMBER DAGRIJLVERLICHT
GELE STADLICHT VOLVO fh4 NIEUWE VERSIE
VOLVO fh4 tagfahrleuchten gelb
180,00
per set excl. VAT
217,80
per set incl. VAT
Limited in stock
Add to your wishlist
  • Unique assortment
  • High quality products
  • Fast delivery
  • Easy returns
  • Friendly customer service for all your questions
VOLVO F4 AMBER DAGRIJLVERLICHT VOLVO F4 AMBER DAGRIJLVERLICHT GELE STADLICHT VOLVO fh4 NIEUWE VERSIE VOLVO fh4 tagfahrleuchten gelb
UNTILL 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4
180,00
per set excl. VAT
217,80
per set incl. VAT

Product description

Volvo has made an adjustment to the headlight unit. As a result, another Daytime Running Light conversion kit is required for the new version. (> +/- 6-2015)
It is important that the set to be ordered has the same number of LEDs as the set already present.
This set consists of a plate with 4 and a plate with 6 LEDs.
(The new version has 2 and 3 LEDs)  SEE HERE



Complete set with yellow LED light sources to convert the standard white daytime running lights to yellow light. Suitable for Volvo Fhs from 2012

Each set consists of a total of 20 Luxeon Rebel LEDs, which together provide up to 2000 lumens! This roughly corresponds to the original light intensity.

The lamps are designed the same as the original lights, with the powerful High Power LEDs placed on aluminum pressure plates.
These plates provide better cooling by transferring heat to the original cooling and extend the life of the LEDs.
The original connections are used again, making installation simple.

Each set contains four lights and thermal paste for mounting. There are two LEDs on each side. The light source with six LEDs mounted on the crook side, and the four light sources on the bottom.

The installation is done as follows:
- Remove the connectors from the existing lighting.
- Remove the screws holding the original diode holders.
- Remove the diode holders from the cooling plates.
- Remove the thermal paste and clean the surface well.
- Apply the supplied thermal paste in a thin even layer to the cooling pads where the lamp will be installed.
- Push the diode holder into the thermal paste and fix it carefully with the original screw.
- Insert the connectors into the new diode holder.

THIS SET HAS NO E-MARK!!

Reviews (0)