Choose a category
Home / • NEW • / FROM 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4

FROM 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4

VOLVO FH4 DAGRIJVERLICHTING GEEL / AMBER volvo fh4  Gelbe LED tagfahrleuchtem passend für VOLVO FH tag new version positionlight amber volvo fh4 FROM 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4
VOLVO FH4 DAGRIJVERLICHTING GEEL / AMBER volvo fh4  Gelbe LED tagfahrleuchtem passend für VOLVO FH tag new version positionlight amber volvo fh4 FROM 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4
FROM 2015 - CONVERSION KIT DLR AMBER - SUITABLE FOR VOLVO FH4
0 Review | Add review
Daytime running lights conversion kit for the new version (FROM 6-2015) See photos for more information - (this set is 2 + 3 LEDs - the old 4 + 6 LEDs)​ Complete set with yellow LED...

Product number

DRLV

Expected delivery time

1 day(s)

€ 160,00
excl. VAT
€ 193,60
incl. VAT
Price per set
Quantity: 
Order
 
Daytime running lights conversion kit for the new version (FROM 6-2015)
See photos for more information - (this set is 2 + 3 LEDs - the old 4 + 6 LEDs)​



Complete set with yellow LED light sources standard white daytime running light can be converted to yellow light. Suitable for Volvo FH's from 2012

Each set consists of a total of 10 Luxeon Rebel LEDs, which together provide up to 2000 lumens! This corresponds approximately to the original brightness.
 
The lamps are the same as the actual original run lights, placed with the powerful High Power LEDs on aluminum plates.
These plates provide eem better cooling by heat transfer to the original cooling and extends the life of the LEDs.
The original terminals are used again, so installation is easy.
 
Each set contains four lights and thermal paste for assembly. There are two LEDs on each side. The light source with six LEDs mounted to the crooks side, and the four light sources at the bottom.
 
Installation is as follows:
- Remove the connectors from the existing lighting.
- Remove the screws that secure the original lamps are put.
- Remove the lights of the cooling plates.
- Remove the thermal paste and clean the surface well.
- Insert the supplied thermal paste in a thin even layer on the koelpaaten where the lamp will be placed.
- Push the new bulb in the thermal paste and place it securely with the original screw.
- Plug in the new bulb
s.

THIS SET HAS NO E-MARK !!

Order by:

No reviews found.

Menu
Zoeken
Wishlist
Account
menu icon
Cart