This unique Strands cruise light strobe controller takes you to the next level of warning lights!
You can connect the strobe controller to the position light in your driving lights or spotlights or connect them to your workinglights consuming less than 30W or any other lights you want to flash. All is possible as long as the connected light consumes less than 30W. The strobe controller is waterproof and has 12 flash patterns and comes with a 3-year function warranty.
How to connect:
The strobe controller output has 6 channels. You add the red positive cables and the balck negative cable to the light and keep them in on order. If you don't use all 6 channels, make sure to isolate the cable ends of the cables not used, so they can't make a short circuit the PCB. If the light is already connected to ground/chassis, you don't need to connect the black cables from the strobe controller, Only the positives ones.
Fot the incoming power you have a red and black cable as always and an extra yellow one. The black and red cable are to be connected to a switch or button inside the cabin. The yellow one is connected to the red cable to choose between the patterns. It's important to connect the channels in the right order as you want to have the right lights to flash when dynamic/running lights.
- 10-35v
- 6 channels
- max 6 x 30W (180W)
- 12 flash patterns
- IP68
INSTALLATION MANUAL
For a detailed explanation of how the Strobe controller works, watch the product video !!
