Ledson Sarox9 + has four powerful LEDs as a position light and, like the other auxiliary lights in the "+ series", lets you choose between xenon white and yellow-orange. The contemporary design is a combination of stylish and progressive, while the interior of the auxiliary light impresses with high-quality components that make all the difference when you're navigating dark roads.
How about: 1 lux brightness at 469 meters and 10200 actual lumens, protection from harsh climates on our Nordic roads with IP68 / IP69K classification, E-marks (ECE R112 / R10 / R7), automatic pressure equalization, electronic thermal management for optimal LED performance and lifespan, aluminum heatsink, stainless steel bracket ...
Combined beam pattern
The light has a combined light pattern, which means that it spreads light over a wide area near the vehicle, but also focuses light that is far away. This beam pattern is ideal when you want plenty of light close to the vehicle for smaller roads, but still have the length to illuminate the road far ahead.
What more is needed?
DT Relay: We strongly recommend using our original connector DT Relay to connect the LED strip to the vehicle. You can then choose to control the bar with a button, or turn it on with the high beams (the bar lights up and goes out automatically when the main lights are on and off, as most people prefer). There is also a fuse between the external light and the battery to prevent possible damage to the battery and other devices. Detailed installation instructions are included with the DT relay.
Mount on vehicle: Can be mounted directly on the vehicle (drill in a suitable place) or with a license plate holder to make it a little smoother and more elegant.
Specifications:
With position light, yellow-orange or xenon-white (connect the color you want)
Combined beam pattern
E-marked ECE R112 (Ref. 45), R10/R7 (white position light)
Range: 938 m (0.25 lux), 469 m (1 lux)
EMC secured
12000 lumens (raw), 10200 lumens (actual)
Cool white light (5700K)
TIR (Total Inner Reflection)
ETM (Electronic Thermal Management)
Laterally reflecting optical system
pressure compensation membrane
aluminum heatsink
Adjustable stainless steel bracket
Lexan polycarbonate front cover
polycarbonate lens
24 months guarantee
Technical specifications:
120W (4 x 20W Cree LED + 4 x 10W Cree LED)
IP68 / IP69K (water and dustproof)
Supplied with 4-pin DT connector
Voltage 9-36V
Main load: 8.1A at 12V and 4.4A at 24V.
Position load: 0.9A
Dimensions & Weight:
Width: 218mm
Height: 218 mm (233 mm incl. bracket)
Depth: 84mm
Cable length: 42 cm
Weight: 1.8kg
Delivered:
Ledson Sarox9 + LED Light 9 "
Bracket, bolts and screws for attaching the auxiliary light with one or two attachment points
DT connector (4-pin)
installation Guide
Cable installation instructions (detailed instructions are included with the product):
Red: additional lamp (+)
Black: additional light / position light (- ground)
White: position light (+) white light
Yellow: position light (+) yellow-orange light
NOTE: Do not cut the DT connector as this increases the risk of moisture damage and will void the warranty.
